International – Platform Belts

Caution	* PLATFORM BELTS REQUIRE FULL TENSION AT ALL TIMES. * IT IS RECOMMENDED THAT THE TENSION SPRINGS, IF FITTED, BE REPLACED WHEN A NEW PLATFORM BELT IS INSTALLED. * A LOOSE PLATFORM BELT WILL TRACK OUT OF THE V-GUIDE AND ROLL OVER. * ALWAYS CHECK PLATFORM BELT TENSION BEFORE BALING.
INSTALL CABLE:	* We have attached a leader wire to the cable for easier installation. DO NOT JERK on leader wire with pliers, it will come off. * Simply snip off the leader wire after installed. * Tuck the cable back into hooks on end being pulled.
AFTER INSTALLING BELT:	* Take up roller adjustment to recommended tension (Belt must be tight). * Run the baler momentarily to check for belt tracking. * After 5 bales, recheck belt tension, tighten belt if necessary.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.